Enable-IT 375 56V Gigabit PoE Injector
MSRP $150 56V 75W Gigabit PoE Injector
► High Powered Gigabit IEEE 802.3af/at/bt PoE Injector
► Auto detect PoE Device Wattage draw and 2 or 4-pair power delivery
► Ideal for installing 4-pair PoE WiFi AP’s or PTZ Cameras up to 1,500feet away
► Support both 2-Pair PoE and high powered 4-Pair PoE Devices
► Any CUSTOM option available at time of order
► ENABLE-IT USA Factory Floor Direct Same Day Shipping
The Enable-IT 375 75W – 56V Gigabit PoE Injector is a long distance driving, fast network performing, strong PoE Output supports IEEE 802.3bt, 802.3at 802.3af standards.
► Understand your device power budget as it reduces effective PoE install distance from 3,500 feet to 1,500 feet.
► With High powered PoE you can Put your PoE devices such as PoE VoIP phones, PoE WiFi Access Points, PoE IP cameras, PoE medical equipment, and PoE security locks at extended range and where you need them, not where you are limited to.
Need something Stronger? Check out our 48V 400W DC Injector ►
Request for Quote ►
Quote from Resellers ►
The EnableIT™ 375 75W – 56V Gigabit PoE Injector (Power over Ethernet) is single port IEEE 802.3af/at/bt compliant Midspan solution that is a compact and easy to install with RJ-45 Ethernet cabling. This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera or other PoE powered equipment. It eliminates the need for external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.
The 375 75W High powered Gigabit PoE Injector is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3af/at/bt compliant device, the Injector uses 4 wires in a category rated wiring bundle. i.e. CAT5e run required for Gigabit Ethernet.
The Enable-IT 375 75W – 56V Gigabit PoE Injector supports both 2-pair and 4-pair PoE output and is ideal for installing high powered IP PoE devices up to 3,500ft when used in conjunction with an Enable-IT PoE Extender.
As will all PoE voltage drops over distance. As a rule of thumb you will lose 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring for best distance results.
► Designed and Made in the USA in High Quality Handcrafted Lots
► Professional Business Grade Product, Solid reliability not Chinese Home Use
► Includes a Industry leading 4 year Manufacturer Warranty
► Maintains existing RJ-45 Ethernet Data (10/100/1000mbps).
► Free Ground Shipping or Low cost Flat Rate 2nd Day / Overnight
► Built in Auto-Recovery, Over-Voltage and Short Circuit protection for your valuable PoE electronics. Output can be shorted permanently without damage.
- 75W – 56VDC IEEE 802.3AT/AF Power Over Ethernet Midspan Injector.
- FCC Part 15 Class B & EN55022 Class B.
- Fully Compliant 25k detection, disconnect and voltage control IEEE 802.3AT
- Over Voltage/Current, Short Circuit Protection Outputs equipped with short circuit protection and overload protection as per 802.3at specification except max average current is 0.55A, Peak 0.6A per pair
- Maintains existing RJ-45 Ethernet Data (10/100/1000mbps).
- Network Equipment independence – Transparent to protocols, applications and MAC addresses.
- Ideal for powering up High Wattage PTZ POE Cameras like the Axis Q-Series with heaters/AC
- FCC Class B Part 15 and EN55022 (CISPR 22) Class B.
- Immunity ESD: EN61000-4-2 level.
- Immunity RS : EN61000-4-3 level.
- Immunity CS : EN61000-4-6 level.
This kit includes the following:
(1) EnableIT™ 375 75W – 56V Gigabit PoE Injector
(1) (90 – 264V AC) Country Specific power cord provided
(1) EnableIT™ 375 75W – 56V Gigabit PoE Injector Quickstart Guide
(1) 4yr Manufacturer Warranty
(1) Free Shipping* and 45-day Money Back Guarantee
AC Input (90 – 264VAC)
DC output 75W – 56V DC IEEE 802.3af/at/bt Power Over Ethernet Midspan Injector.
Country Specific IEC 60320C13 Grounded power cord provided.
Built in Auto-Recovery, Over-Voltage and Short Circuit protection.
1000Mbps full-duplex Ethernet Data
Ethernet: (1) LAN RJ-45 10/100/1000 Base-TX autosensing shielded socket for LAN Input
(1) LAN RJ-45 10/100/1000 Base-TX autosensing shielded socket for PoE output.
Height 1.75″ (44mm) Depth 4.75″ (120mm) Width 2.75″ (70mm)
Operational Temperature: -13°F to 176°F (-25°to 85°C)
Humidity: 5% to 95%, non-condensing
Ruggedized black plastic casing with mounting tabs.
Power, PoE active, PoE error LEDs
#1 ► Designed and Made in the USA
Factory Direct Highest Quality Expert Product Engineering.
Don’t be fooled by foreign companies with US offices selling you cheap quality electronics from who knows where.
Insist on USA made high quality equipment and support.► Why a Made in the USA product Matters
#2 ► Professional Grade Equipment – Trusted Reliability
(Ruggedized, Extreme Distance, Highest Throughput, OEM Customizable, Encrypted and Secure)
Since 1997, we have been manufacturing the highest quality Made in the USA Ethernet Extenders
US Factory Floor direct same day flat rate shipping. ► Our commitment and promise of quality and real value.
#3 ► Lifetime Product Warranty
Peace of Mind Longest Product Warranty in the industry – Limited Lifetime Product Warranty.
Why would you waste your time and money with anything of inferior quality
or from a company that doesn’t stand behind its own products?► Warranty Details
#4 ► 45-Day Money Back Guarantee
For those who wish to try our superior USA engineered Ethernet and or PoE technology.
We offer a gracious 45-Day trial period when purchasing single unit kits per our policy ► Money Back Details
#5 ► Certified Spyware Free
Buyer Beware! Knockoff competitors of our products have been banned by the US Govt for containing data stealing spyware.
Our products are trusted in some of the most secure environments such as control of US Nuclear weapon systems through
our national security contracts for the DOD and US Military.
#6 ► No Configuration – Plug and Go – Highest Throughput
All of our products are ready ring out of the box. Simply connect the devices to your cabling and plug them in if they require a power adapter.
There are no configuration parameters to set up! We even include your country-specific power adapters.
Don’t settle for low bandwidth. And because we offer the highest speeds of any Ethernet Extender Manufacturer, we make sure you won’t have to.
High performance without compromise – that’s what you’ll get.
#7 ► Same Day Flat Rate Shipping – US Factory Floor Direct
Our US West coast AS9011D manufacturing facility processes all orders placed by 3:30pm PST and expedites for same day shipping worldwide.
Flat Rate Domestic US Shipping – See our preferred shipping commitment – See our policy ► Shipping Details
#8 ► Next Business Day Advanced Replacement Service
No other manufacturer in our industry can stand behind their products or services as well as Enable-IT does bar none.
We offer a 4-Year peace of mind business continuity AREP (Next Business Day Advanced Replacement). – See our ► AREP Details
#9 ► US Based Expert Technical Support and Customer Care Team
No need to speak Mandarin or Urdo and or wait days to get timely support to technical questions answered.
Our Expert Technical Customer Care Team along with our OEM Design engineers and manufacturing operations are all Proudly USA In-house.
We take great pride in listening to and understanding your needs and providing professional timely support.► Click to Chat
#10 ► Custom USA Made OEM Solutions
If you need a design or specifications that are not in one of our products, our OEM Design engineers and manufacturing operations are all Proudly USA In-house.
We can create tailored OEM solutions in days with minimum 10 unit quantity orders. Enable-IT can give you a strategic advantage in your marketplace – ► Try Enable-IT