The paradigm shift in analog video cameras to the new IP PoE based video surveillance devices has created disarray in being able to deploy at distance like you used to and requires a new LAN based skill set that also limits you to a fraction of the previous deployment distances.
Enable-IT Ethernet Extension and PoE Extension solutions can enable your devices up to 9,000ft and can deliver the following benefits:
► Single point of connection for your power and LAN data. Outbid your competitors.
► Creative custom solutions to meet extreme challenges.
► Be able to install your PoE equipment where you need – not where you are limited to.
► Installs in minutes – have your remote PoE and LAN up in minutes
Enable-IT PoE solutions has extreme engineering able to deliver up to 60W PoE to 4,000ft away with Gigabit LAN!
Enable-IT serves many of the top US Govt Agencies, Aerospace, and Defense Contractors
USPS – All Post Offices
SAIC
General Dynamics
Raytheon
Martin Marietta
Northrup
US Dept Of Defense
AFÉTA / Camp Peary
State of Hawaii, DOD, State Civil Defense
BH Security
Diebold Information & Security Systems – USPS
US Federal Prison System (Locations require NDA)
US Army – Striker Force Tethered Convoy Drones
Drone Aviation – Dirigible Surveillance
US DARPA TALONS Project
USAF 846th Test Squadron
US Army Yuma Proving Ground
Vandenberg Space Force Base
Naval Air Station Point Mugu
Strategic Robotic Systems
The Kapsch Group – ITS – Kapsch TrafficCom
Basix Automation
AHS Security
City of Washington D.C.
City of Mission Viejo
City of Pasadena
Department of Transportation – Minnesota
Department of Transportation – Utah
We Are More Than Happy to Listen To Your Specific Project Needs.
Enable-IT Guarantees Your e-Mail Privacy 100%
Your Information Is Never Shared Or Sold.
Every IP camera installation eventually hits the same constraint: IEEE 802.3 limits standard Ethernet — and PoE — to 100 meters (328 feet) from switch to camera. In practice, that ceiling is reached faster than most project plans anticipate. A parking structure perimeter. A loading dock 400 feet from the IDF closet. A campus gate at the end of a long access road. A remote corner of a warehouse where the nearest Cat6 run simply does not reach.
The conventional workarounds — pulling new fiber, installing an intermediate powered switch, or falling back to wireless bridges — each carry significant cost, complexity, or security tradeoffs. Enable-IT PoE Extenders eliminate all three by delivering both Ethernet data and PoE power over a single existing wire pair at distances up to 3,280 feet, with no local power outlet and no wireless exposure.
Scenario 1: Large Warehouse or Distribution Center — Perimeter and Interior Coverage
A 500,000-square-foot distribution center requires IP cameras at dock doors, loading bays, cold storage entries, and roof-level interior positions — most of which sit 300 to 800 feet from the nearest network closet. Running new Cat6 to each position requires core drilling through concrete tilt-up walls, conduit through active picking aisles, and electrician time to install local power outlets at every camera. The project timeline stretches to weeks and the cost per camera run climbs sharply.
With Enable-IT PoE Extenders, the integrator repurposes unused wire pairs from existing Cat5e home-run cables already in the building — infrastructure installed during original construction and left dormant. One 865XS PRO unit per cluster delivers four PoE camera feeds over a single wire pair from the IDF. The remote 4-port unit mounts in a standard electrical box at the camera cluster location, eliminates the local power outlet requirement, and brings the per-camera infrastructure cost down significantly versus fiber or wireless alternatives.
Scenario 2: Municipal Parking Structure — Outdoor Exposure, Multiple Levels
A multi-level municipal parking garage requires cameras at entry and exit lanes, stairwells, elevator lobbies, and rooftop level — in an environment with temperature cycling from below freezing in winter to well above ambient in summer, plus exposure to vehicle exhaust, moisture, and vandalism risk. Wireless bridge solutions are ruled out due to RF reflections off concrete and metal decking. Fiber is cost-prohibitive given the number of discrete camera positions across six levels.
The 865W PRO outdoor PoE Extender is IP68-rated and operates across a temperature range of -40°C to +70°C — no additional weatherproof enclosure required. The local unit mounts inside the parking office or security room; the remote unit installs directly at the camera position, exposed to the environment, with the camera connecting via a short patch cord. Each run covers up to 2,500 feet over existing telephone-grade copper left in the structure during original construction.
Scenario 3: Government Campus or Secure Facility — Encrypted, Hardwired CCTV
A federal agency facility requires CCTV coverage of perimeter fencing, vehicle inspection lanes, and building access points — all at distances exceeding 100 meters from the security operations center. Wireless solutions are prohibited by security policy. The procuring officer requires equipment that is TAA-compliant, manufactured in the USA, and available on GSA schedule.
Enable-IT PoE Extenders are designed and manufactured in the United States to AS9100D Aerospace Quality standards, have served U.S. Government networks since 1997, and are available through the GSA Schedule. Every unit includes built-in AES encryption between the local and remote units — the signal traveling over the copper run is encrypted end-to-end, providing a security posture that wireless solutions fundamentally cannot match. For vehicle inspection lanes and perimeter fence lines at 800 to 2,000 feet from the SOC, the 865X PRO or 865XS PRO provides Gigabit throughput with full encryption and PoE delivery at the camera.
Use the matrix below to match your deployment conditions to the correct Enable-IT PoE Extender. All models are plug-and-play, require no configuration, and ship as complete end-to-end kits with all required hardware.
Deployment Scenario | Recommended Model | PoE Ports | Max Distance | PoE Power | Why This Model |
Single IP camera beyond 100m — indoor | 821P | 1 | 3,280 ft / 1 km | 120 W adapter | 100 Mbps is sufficient for 4K H.265 streams; 1-pair or 4-pair cable; lowest cost per camera run |
Single HD / PTZ camera — high bitrate or analytics | 865X PRO | 1 | 3,000 ft / 915 m | 60 W | 1.2 Gbps throughput handles 4K+ streams and onboard analytics without bottleneck |
Multiple cameras at one remote location (2–4) | 865XS PRO | 4 | 3,000 ft / 915 m | 60 W (shared) | One wire run powers a 4-port PoE switch at the remote end — no conduit for each camera |
Outdoor perimeter / parking lot — exposed to weather | 865W PRO | 2 | 2,500 ft / 762 m | 61 W | IP68-rated enclosure; rated -40°C to +70°C; no additional weatherproof housing required |
Outdoor multi-camera cluster — building exterior or campus | 865XW PRO | 4 | 3,000 ft / 915 m | 60 W | IP68 multi-port outdoor unit; single run feeds up to 4 exterior cameras or mix of camera + AP |
Long-range run — over 3,000 ft, lower bandwidth need | 821P | 1 | Up to 3,280 ft / 1 km | 120 W adapter | Maximum copper distance in the lineup; ideal for perimeter fence cameras, gate kiosks, remote outbuildings |
Secure government or military CCTV | 865X PRO or 865XS PRO | 1 or 4 | 3,000 ft / 915 m | 60 W | Built-in AES encryption; AS9100D quality; hardwired — no RF exposure; GSA schedule eligible |
Shared PoE note: On 4-port models (865XS PRO, 865XW PRO), PoE wattage is shared across all active ports. Confirm total power draw of connected devices before deployment. Enable-IT engineering will verify your power budget at no charge
A mid-sized university security department needed to extend its CCTV coverage to 14 additional camera positions around the perimeter of its main campus — a mix of parking lot entries, athletic facility exteriors, and a remote equipment storage yard located over 900 feet from the nearest network closet. Pulling fiber to each location had been quoted at a cost that exceeded the entire remaining security budget for the year. The department’s integrator specified Enable-IT 865W PRO outdoor PoE Extender units, leveraging existing 2-pair telephone cable that had been installed in underground conduit during original campus construction in the 1990s. Installation was completed in two days per zone. All 14 cameras were online within the project window, operating at full 1080p resolution with stable PoE delivery at each endpoint — without a single new conduit run, power outlet installation, or intermediate switch. The department subsequently standardized on Enable-IT PoE Extenders for all future CCTV expansion across its three satellite campuses.
The principle illustrated here is consistent across industries: the copper infrastructure required to run PoE cameras at distance almost always already exists. Enable-IT PoE Extenders activate it — eliminating the primary cost and schedule drivers in most camera installation projects.
Enable-IT’s engineering team reviews cable plant details, camera power draw, and distance requirements before you order — at no charge. Call (888) 309-0910 Monday–Friday, 5AM–4PM PST, or use the live chat on this page.
We Are More Than Happy to Listen To Your Specific Project Needs.
Enable-IT Guarantees Your e-Mail Privacy 100%
Your Information Is Never Shared Or Sold.
