Easily add IEEE 802.3 Power over Ethernet PoE (48V~ 56V) 61W ~ 150W power to your surveillance cameras,
WiFi Access Points (APs) and other devices with easy-to-install, plug-and-play,
Industry-Strategic Innovations from Enable-IT Gigabit PoE+ Midspan Power Injectors.
The Enable-IT 360 61W 56V Gigabit Injector (Power over Ethernet) is single port IEEE 802.3af/at/bt (type 3) dedicated always on (No-PoE detect) 2 or 4 pair PoE solution that is a compact and easy to Plug and Go PoE.
Get a superior 2.5GB performance, lower cost than anyone solution.
The Enable-IT 395 is a IEEE 802.3bt standard 56V DC 100W 2.5 Gigabit PoE++ Injector with auto sensing for 2 pair or 4-pair PoE Power. Mode A and Mode B
Ideal for installing Super high powered 2 or 4-pair PoE IP devices IEEE 802.3af/at/bt (type 4) where you need to.
The EnableITâ„¢ 324 PoE Reducer is a unique product that cools off high voltage PoE and transforms it down to a 12VC or 24V DC 21W PoE signal with Ethernet LAN data. Can handle up to 90VDC input.
DESIGNED and MADE in the USA with Quality and Pride.
The EnableIT 324 12V/24V DC Gigabit PoE Reducer is one of the world’s only unique devices that allows you to use high-power PoE Extenders with your sensitive PoE Devices at distance without the worry of over-voltage damage.
The EnableIT 324W PoE Reducer is a unique product that cools off high voltage PoE and transforms it down to a 24V DC 21W PoE signal with Ethernet LAN data. Can handle up to 90VDC input.
DESIGNED and MADE in the USA with Quality and Pride.
The EnableIT 324W 24V DC Gigabit PoE Reducer is one of the world’s only unique devices that allows you to use high-power PoE Extenders with your sensitive PoE Devices at distance without the worry of over-voltage damage.
The EnableIT Mini Industrial Gigabit SFP Transceiver provides cost-effective, entry-level media conversion Fiber SFP modules and the Gigabit LAN.
The EnableIT DIN Rail Mounting Clip for standard 35mm DIN Rails with rail depths of 7.5mm or greater. Â
Simple sturdy DIN rail mounting bracket for a wide variety of projects where standard DIN rail is used for mounting devices. The flat mounting surface and Non-threaded countersunk holes make these clips versatile for mounting devices that do not have their own DIN rail mounting clip.
A PoE Injector is a critical device for delivering DC Power over Ethernet (PoE) to network devices, combining dc electrical power and data transmission through a single Ethernet cable.
By integrating an Enable-IT 395 Super Industrial grade 2.5 Gigabit PoE Injector into your setup, you eliminate the need for separate inefficient ac to dc power adapters, simplifying network infrastructure.
The Enable-IT 395 PoE 2.5G Solution connects to a DC power source and an Ethernet LAN port, thus injecting DC power into the cable to simultaneously transmit data and dc electricity to any PoE-enabled devices. It ensures reliability in various environments.
The primary role of an Enable-IT 395 Super Industrial grade PoE Injector is to streamline the deployment of network devices, especially in locations where separate power sources are impractical. Single-port units act as efficient PoE adapters, merging power and data over an RJ45 Ethernet cable. They adhere to IEEE standards—802.3af (up to 15.4W), 802.3at (PoE+, up to 30W), and 802.3bt (PoE++, up to 150W)—defining the PoE power budget for compatibility with devices like IP phones, wireless access points, IP cameras, and network switches.
Using a PoE Injector reduces installation complexity and costs by minimizing cabling needs. For optimal performance, ensure devices are PoE-compatible, as not all support this technology.
The Enable-IT 395 Super Industrial grade 2.5 Gigabit PoE Injector is essential for efficient, cost-effective network setups in challenging environments.
We Are More Than Happy to Listen To Your Specific Project Needs.
Enable-IT Guarantees Your e-Mail Privacy 100%
Your Information Is Never Shared Or Sold.
