Long-Range PoE & Ethernet Extenders for Security Cameras and Surveillance
Security and Surveillance Solutions
Every security system has the same weak spot: the camera can only go where the cable can reach. Standard Ethernet and PoE stop at 328 feet (100 meters), yet the places that most need watching are rarely that close to a network closet. Parking lots, perimeter fences, gates, stadiums, gas pumps and remote buildings all sit farther out. Enable-IT builds the security and surveillance solutions that remove that limit. Our Ethernet Extenders and PoE Extenders deliver secure, encrypted data and power over a single cable, so you can put your IP cameras where you need them, not where the wiring forces you to.
Enable-IT has engineered Ethernet and PoE extension technology since 1997 for US national security, federal agencies, police departments and commercial customers. Every unit is designed, manufactured, shipped and supported in the USA.
Security and Surveillance Solutions
Why Wired Surveillance Still Wins
Wireless cameras look simple until interference, metal structures, weather and congestion start dropping frames at the moment you need them most. A hardwired link gives you steady bandwidth, low latency and far fewer connection failures, which is critical for real-time monitoring and PTZ control. The usual alternative, fiber, is expensive to install and can’t carry PoE power to the camera. Enable-IT closes the gap. Our PoE Extenders power and connect cameras up to 4,000 feet away, and our Ethernet Extenders carry data up to 9,000 feet (2,743 m). Both run over twisted pair, legacy telephone wiring or outdoor coax that may already be in the ground. Compare the options in wired vs. wireless camera surveillance and learn how extenders work in PoE extender distance for surveillance cameras.
AI Cameras and Campus Security
AI has turned cameras from passive recorders into active monitors. Modern analytics tell a person from a swaying branch, flag loitering and intrusions, read license plates and send real-time alerts, cutting false alarms and response times. Those cameras still need power and a stable network connection. On campuses, Enable-IT extenders put AI cameras in parking lots, athletic fields, dorm entrances and satellite buildings over existing wiring, with no new network closets or intermediate switches. They run transparently, so there’s no need to reconfigure IP addresses or protocols. Outdoor kits such as the 821WP carry encrypted PoE over a single wire pair in rugged conditions. Read more in AI-powered surveillance and campus security trends.
Perimeters, Gates and Off-Grid Sites
Gate entrances, fence lines, oil and gas sites, water plants and construction yards often have no nearby outlet or network drop. Enable-IT’s outdoor waterproof extenders are plug and go and reach up to 4,000 feet for PoE, so cameras, card readers and intercoms run from one protected power source instead of a solar kit at every pole. Where solar is already in place, our Ethernet Extenders replace insecure wireless links with fast, encrypted wired backhaul. See remote gate access control and video surveillance and off-grid perimeter security, which covers the 865W PRO Outdoor Gigabit PoE Extender.
Law Enforcement: LPR and Tactical Robotics
Police departments use Enable-IT technology in the field. The 8805M Mobile Gigabit PoE Switch runs PoE IP license plate reader cameras straight from a vehicle’s 12V or 24V battery and keeps them running even at low-voltage extremes. In Overland Park, Kansas, Enable-IT 828 Gigabit PoE Extenders power wireless access points near the fuel pumps. Patrol cars automatically upload LPR footage, with a full audit trail, while they refuel. Read police license plate reader surveillance and the Overland Park LPR case study. For hostage negotiation and building clearing, Ethernet-tethered robots give SWAT teams live video and two-way audio with unlimited run time and no wireless dropouts. Learn about tethered surveillance robots.
Managing and Scaling Your Video System
Whether you record to an on-site NVR or a cloud platform, extenders let you grow coverage without rewiring the building. For borders, ports and transportation sites, the waterproof 828WP kit supports high-power PoE cameras and can chain up to three 828W units to cover about 2,000 feet. For PTZ cameras that follow motion across large areas, Enable-IT PoE Extenders place the camera up to 3,000 feet from the switch. Explore top methods for managing video surveillance, how PoE IP cameras help businesses, PoE extensions for surveillance cameras, video security surveillance trends and cloud-based VIAAS cameras.
Why Security Integrators Choose Enable-IT
- Distance without fiber. PoE up to 4,000 ft and Ethernet up to 9,000 ft over existing copper or coax.
- One cable for power and data. No outlet, generator or solar kit needed at the camera.
- Trusted secure encryption. Built for military, government and law enforcement networks where video evidence must stay protected.
- Outdoor and mobile ready. Waterproof extenders for poles and gates, plus 12/24V DC PoE switches for vehicles and boats.
- Plug and play. Transparent to your VMS, NVR and cameras, with no IP or protocol changes.
- Custom OEM. Tailored designs built in-house in days, from 10-unit minimums, through our custom OEM extender program.
- Made in the USA, GSA Schedule. US-based engineering, manufacturing and support, with GSA Schedule ordering for agencies.
- Try it first. A 45-day trial on single-unit kits.
Planning a new camera deployment or extending an existing one? Talk to an Enable-IT engineer for a free custom design consultation.














