ENABLE-IT 265LP GIGABIT ETHERNET & POE LIGHTNING PROTECTION KIT

MSRP $95 A Complete Solution End-To-End

Set of 2 units for protection of outdoor lines
The PLANET's most trusted and deployed brand since 1982
Ideal for protecting Mission Critical LAN Uptime of your network
Compact weather resistant offering protected dual LAN port connections
Support Gigabit Ethernet and Power Over Ethernet devices
Grounding connection for extra protection to a drain wire


DESIGNED & MADE IN THE USA WITH QUALITY AND PRIDE.
PROFESSIONAL BUSINESS GRADE PERFORMANCE,
RUGGEDIZED EXTREME TEMPERATURE ENCLOSURE,
ENCRYPTED AND SECURE.


The compact weather resistant housing features a single port access and a lockable hinged cover that will not close while wires are being terminated. Mounting holes are provided on the rear. A ground lug and terminal is provided in the lightning protector housing providing superior grounding. This lightning surge protector kit is compatible with Cisco Aironet 1100 and 1200 series access points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.

Beware of cheap competitors as a lot of their LAN devices are banned in the USA due to spyware.
Don't risk your business data to cheap, low quality imported LAN equipment!
Protect the value of your LAN data and company secrets.
Insist on the Enable-IT Brand, trusted by security experts worldwide.

In-Stock NOW         Product UPC: 896741002515         

Request a Quote Quote from Resellers
SKU: 265LP Category:
The Enable-IT™ 265LP Gigabit PoE Lightning Protection Kit is a set of compact weather resistant units that provides cost-effective solution for protecting PoE and Ethernet devices from damaging electrostatic discharge and surges.

The units are fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10/100/1000 Base-T Ethernet networks, providing Surge Protection for Ethernet data pairs as well as the PoE DC power feed.

The internal High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are /- 15 volts on pins, 1, 2, 3 and 6 and /- 58 volts on pins 4, 5, 7 and 8. The units are compatible with both normal and inverted polarity voltage PoE equipment.

For maximum Surge Protection for Ethernet and PoE installs, this kit provides two 265LP units - one at each end of your Ethernet cable run. Most PoE capable equipment is not protected from surges on Ethernet cabling. The Enable-IT™ 265LP Gigabit Ethernet Lightning Protector Kit is compatible with 10/100/1000 Base-T devices as well as Power-over-Ethernet (PoE) devices, including Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE).

These units will save your expensive LAN or PoE IP Equipment at both ends and they do their job by taking the brunt of a lightning strike damage. They are not repairable once they perform this task and will need to be replaced. If you live in a lightning prone area it is advisable to have a spare set for each outdoor line your trying to protect so that you maintain the safety of your expensive LAN and PoE Equipment.

Enable-IT is the seminal creator and inventor of Ethernet Extender and PoE Extender concepts and technology. We are the original trusted source.

The US Federal Govt has banned most all non-US made networking products in their networks - Why risk your business using cheap foreign LAN products?

Try the world's fastest performing and most cost effective Ethernet Extender and PoE Extender Solutions -

With a 45-day money-back guarantee and Same Day Flat Rate Shipping, you have nothing to lose.

Designed and Made in our USA AS9100D Aerospace Quality Production Facilities.

Professional Business Grade Product, Solid reliability not Chinese Home Use crap.

Includes the Industry leading Limited Lifetime Manufacturer Warranty.

        What's the cost of your network being down?

Insured, Same Day Flat Rate Shipping - US Factory Floor Direct.

Weatherproof micro design ideal for wall or pole mounting.

All in one simple solution. that protects each end of your outdoor line.

Compatible with any IEEE 802.3 AF / AT PoE injector / Midspan up to 58V DC.

LAN Device independence - Transparent to 802.3 Protocols, Applications.
      and MAC / IP addresses.

Gigabit Ethernet and PoE compatible.

This kit includes the following:
(2) Enable-IT 265LP Outdoor Lightning Protection units

(1) Enable-IT 265LP Quickstart Guide
► Same Day Flat Rate Shipping - US West Coast Factory Floor Direct
► Lifetime Manufacturer Warranty

Power

ESD/EMP Protection - Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/µs
DC Spark-Over Voltage - 90V @ 100V/s
Impulse Spark-over Voltage - 700V @ 1kV/µs

Data Rate

Gigabit LAN full-duplex Ethernet Data & with simultaneous PoE delivery on all 8 pairs

Interface

Ethernet: (2) LAN RJ-45 ports

Dimensions

Height 3.5" (90mm) Depth 1.28" (32mm) Width 2.4" (61mm)

Environment

Operational Temperature: -22°F to 150°F (-30°to 65°C)
Humidity: 10% to 90%, non-condensing

Enclosure

Ruggedized wallmount plastic casing with enclosed Network ports

Datasheet ►      Datasheet pdf

Quickstart Guide ►      Datasheet pdf

Product Manual ►      Datasheet pdf

ENABLE-IT 265LP GIGABIT PoE LIGHTNING PROTECTION INSTALL
ENABLE-IT 265LP WIRING
ENABLE-IT 265LP WIRINGENABLE-IT 265LP WIRING
#1 ► Designed and Made in the USA
        Factory Direct Highest Quality Expert Product Engineering.
        Don't be fooled by foreign companies with US offices selling you cheap quality electronics from who knows where.
        Insist on USA made high quality equipment and support.Why a Made in the USA product Matters

#2 ► Professional Grade Equipment - Trusted Reliability
        (Ruggedized, Extreme Distance, Highest Throughput, OEM Customizable, Encrypted and Secure)
        Since 1997, we have been manufacturing the highest quality Made in the USA Ethernet Extenders
        US Factory Floor direct same day flat rate shipping. Our commitment and promise of quality and real value.

#3 ► Lifetime Product Warranty
        Peace of Mind Longest Product Warranty in the industry - Limited Lifetime Product Warranty.
        Why would you waste your time and money with anything of inferior quality
        or from a company that doesn't stand behind it's own products?Warranty Details

#4 ► 45-Day Money Back Guarantee
        For those who wish to try our superior USA engineered Ethernet and or PoE technology.
         We offer a gracious 45-Day trial period when purchasing single unit kits per our policy Money Back Details

#5 ► Certified Spyware Free
        Buyer Beware! Knockoff competitors of our products have been banned by the US Govt for containing data stealing spyware.
        Our products are trusted in some of the most secure environments such as control of US Nuclear weapon systems through
        our national security contracts for the DOD and US Military.

#6 ► No Configuration - Plug and Go - Highest Throughput
        All of our products are ready ring out of the box. Simply connect the devices to your cabling and plug them in if they require a power adapter.
        There are no configuration parameters to set up! We even include your country-specific power adapters.
        Don’t settle for low bandwidth. And because we offer the highest speeds of any Ethernet Extender Manufacturer, we make sure you won’t have to.
        High performance without compromise – that’s what you’ll get.

#7 ► Same Day Flat Rate Shipping - US Factory Floor Direct
        Our US West coast AS9011D manufacturing facility processes all orders placed by 3:30pm PST and expedites for same day shipping worldwide.
        Flat Rate Domestic US Shipping - See our preferred shipping commitment - See our policy Shipping Details

#8 ► Next Business Day Advanced Replacement Service
        No other manufacturer in our industry can stand behind their products or services as well as Enable-IT does bar none.
        We offer a 4-Year peace of mind business continuity AREP (Next Business Day Advanced Replacement). - See our AREP Details

#9 ► US Based Expert Technical Support and Customer Care Team
        No need to speak Mandarin or Urdo and or wait days to get timely support to technical questions answered.
        Our Expert Technical Customer Care Team along with our OEM Design engineers and manufacturing operations are all Proudly USA In-house.
        We take great pride in listening to and understanding your needs and providing professional timely support.Click to Chat

#10 ► Custom USA Made OEM Solutions
        If you need a design or specifications that are not in one of our products, our OEM Design engineers and manufacturing operations are all Proudly USA In-house.
        We can create tailored OEM solutions in days with minimum 10 unit quantity orders. Enable-IT can give you a strategic advantage in your marketplace - Try Enable-IT